How do you install a gutter apron? Installing gutter aprons can be a very simple process. It does not require expertise. Learning is easy when you have the right tools, time, and desire to do so. Learn how to install gutter aprons by yourself by reading this article.
Can You Install Gutter Apron Over Drip Edge?
Installing gutter aprons over drip edges is not required on a new roof. Gutter aprons or drip edges would be required. Because these components share a common purpose and are installed in the same area, you wouldn’t want them both next to each other.
Do I Need Drip Edge and Gutter Apron?
A Gutter Apron, also known as L- Metal, is installed above your roof decking and sits over the edge of your gutter. Gutter aprons are installed right under your shingles as well. Although it is not required in most states to have a drip edge or a gutter apron, it is highly recommended.
In order to properly install gutter apron, you need to understand the processes involved in order to avoid wasting time and money on something that won’t do the job. Installing gutter aprons should use plastic mesh, since it is the easiest material to work with. Ensure that the mesh edges are trimmed so that the mesh creates a smooth surface. There is then a gutter apron installed under the mesh, atop the existing roofing materials.
Installation of gutter aprons is done to prevent rainwater from getting into the gutter and ruining your roofing materials since rainwater falling on the roof is protected from debris. The location of the gutter installation must be determined before you begin. The distance between the bottom of the eaves and the top of the fascia board at the base of the roof should be measured. At this point, the existing roof may be folded up so that the gutter can go up as high as possible. Upon installation, the gutter apron should be supported with plywood if the eaves extend above the fascia board.
There are different types of gutter aprons that are used for different types of roofs. Flat gutter aprons are ideal for roofs with flat roofs. This type of apron is made out of two pieces that fit together and have an overlapping part at the drip edge. These are attached to the bottom part of the roof by metal fasteners. These can be attached to the house by screws.
Lateral gutter apron work well in areas where the soil is not steep enough to completely cover the fascia board. In this installation, the gutter aprons are adjusted to cover the top and bottom of the fascia board. There are two types of lateral gutter apron models, the round model, and the rectangular model.
A gutter apron is a long piece of metal fold that starts under the first course of shingles and hangs over the sheathing of the roof. Gutter aprons take on an additional role by hanging down an inch or so into the back of the gutter to prevent water from dripping or splashing behind the gutter.
Fiberglass and asphalt are the most common materials used for roofing construction. Other roofing materials can also be used, such as clay tile, tiles, and slate. These materials will all have their own advantages and disadvantages, so it is best to research these different types of materials prior to selecting a particular model. When selecting a roofing contractor or other installation professional, it is important that they are familiar with the installation process and that they use the correct type of roofing materials to ensure that the job is done correctly. Gutter apron installation professionals should be licensed and have many years of experience in this field.